Power Color Classic G3/500
---Inside & Modification part-2 (Case & the others)---
Appearance & Peripheral equipments
Inside & Modification part-1

Logic Board

home

I/O Panel (Outer Plastic)

TV/FM terminals are not completed

I/O Panel (Inner Metal)

Security Ring

Metal Panel

Apple Video System (Rev.D)

Metal Panel

External Video Output (S-Video & RCA)
I also have an External Video Output Connector (VGA).

Third party CSII Ethernet Card (REUDO)
-->Farallon CSII 100Base-TX/10Base-T Ethernet Card

Inner Case

Apple TV/FM Radio System

PCB for Remote Contorol

Apple TV/FM Radio System

PCB for Remote Contorol

Apple TV/FM Radio System

PCB for Remote Contorol

Remote Control Receiver

Inner case (slit for Logic Board)

Inner case (slit for Logic Board)

Inner case (connector for Logic Board)

Speaker

Inner case (slit for Logic Board)

Heatsink of the regulator (generating
+3.3V from +5V)

Speaker

Regulator (generating +3.3V from +5V)

Inner Case (slits for Apple Video System
& G3 Upgrade Card from rear)

Inner case (slits for Apple Video System
& G3 Upgrade Card from bottom side)

Inner case (slits for Apple Video System
& G3 Upgrade Card from upper side)

Inner case (slit for CSII 100Base-TX/
10Base-T Ethernet Card from upper side)

Inner case (slit for CSII 100Base-TX/
10Base-T Ethernet Card from upper side)

HDD sled is also partially cut.

Inner case (slits for expansion cards
from upper side)

FDD case (slit for G3 Upgrade Card)

Hole for Additional Cooling Fan
-->New Cooling System

Inner case

Plastic Sheet

Plastic Sheet

Inner case

Ventilation holes

Cooling Fan (SANYO 12V-0.09A)

HDD access lamp
(This is access lamp circuit for IDE HDD.)

HDD access lamp LED on push button board

Appearance & Peripheral equipments
Inside & Modification part-1

Logic Board

home

This page created on a Macintosh using PhotoPage by John A. Vink.

Copyright (C) 2000-2003 MISUTHiKU. All Rights Reserved.